
Product characteristics:
KT10 type DTH drilling rig is powered by Cummins 3 diesel engine. It can drill vertical, inclined and horizontal holes of 90-125mm, mainly used for drilling blasting holes and pre-cracking holes in open-pit mines and stone works by means of both ends output and driving screw compression system and hydraulic transmission system simultaneously. The drilling rig is equipped with automatic connecting and unloading rod system and drilling rod lubrication module, which can realize single operation and reduce mine operators. The main control action of the driller is integrated on a handle, which is easy to operate and equipped with anti-sticking drilling system. The drilling angle and depth indication can be selected to simplify the drilling process control and improve the drilling quality. Efficient dust collection system, spacious cab, high-power heating and cooling air conditioning and high-quality audio equipment provide a high-quality operating environment to maximize operator efficiency.
Product parameters:
Transport dimensions (length * height * width) | 9100*2450*3200 | Number of rod | 7+1 |
weight | 14500Kg | Drill rod specification | Φ76*4000 mm |
Rock hardness | f=6-20 | Impactor | 35A/45A |
Borehole diameter | 90-125mm | Engine | Cummins C325 |
Ground clearance | 420mm | Cylinder number | 6 |
Track frequency modulation angle | 10°up, 10°down | output power | 242KW/2200rpm |
Driving speed | 0-3Km/h | Hydraulic pump | 5×gear pump |
Climbing ability | 25° | Screw type air compressor | Zhejiang open mountain |
Traction force | 120KN | Air volume | 18m3/min |
torque | 2500Nm | wind pressure | 17Bar |
speed | 0-120rpm | Travel control system | Hydraulic pilot |
Drill arm lifting | Up 47 °,down 20 ° |
Drilling control system | Hydraulic pilot |
Drill arm swing angle | 50° to the right, 21° to the left | Anti card | Automatic electro hydraulic card protection |
Slide angle | 95 ° to the right, 35 ° to the left | Voltage | 24V, DC |
Pitch angle of carriage | 114° | Safety cab |
Compliance with rockfall anti roll standard |
Compensatory stroke | 1353mm | Indoor noise level | Lower than 85dB(A) |
Propeller stroke | 4490mm | Chair | Adjustable |
Maximum propulsion force | 25KN | Air conditioner | Standard cold and warm |
Propulsion method | Roller chain | entertainment | Radio +Mp3 |
Economic drilling depth | 32m |
|
|